Pentax Silkypix K-500 Operating Manual page 155

Saving the White Balance Settings of a Captured Image
You can copy the white balance settings of a captured image and save
it as Manual White Balance.
Only the white balance settings of still pictures taken with this camera can
be copied. However, the following images cannot be selected.
• Multi-exposure image
• Index image
• Still pictures captured from a movie
1
Press the four-way controller (3) in the single image display
of playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select K (Save as
Manual WB), and press the 4 button.
The save confirmation screen appears.
3
Turn the front e-dial (R) to select an image.
4
Use the four-way controller (23)
to select a number, and press
the 4 button.
The white balance settings of the
selected image are saved as Manual
White Balance and the camera is ready
to take a picture. The white balance
setting is K.
100-0001 100-0001
Saves this image's White Saves this image's White
Balance settings as a custom Balance settings as a custom
selection selection
Save as Manual 1 Save as Manual 1
Save as Manual 2 Save as Manual 2
Save as Manual 3 Save as Manual 3
Cancel Cancel
MENU
153
5
OK OK
OK