Pentax Silkypix K-500 Operating Manual page 202

200
1
Select an image for applying the digital filter in the single image
display, and press the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select D (Digital
Filter), and press the 4 button.
The screen to select a filter appears.
3
Use the four-way controller
(2345) to select a filter.
You can check the selected filter effect
with the background image.
You can select a different image
by turning the front e-dial (R).
Proceed to Step 7 if you do not need
to change the parameters.
6
4
Press the M button.
The screen to adjust the parameters appears.
5
Use the four-way controller (23) to
select a parameter and the four-way
controller (45) to adjust the value.
6
Press the 4 button.
The screen that was displayed in Step 3 appears again.
7
Press the 4 button.
The save confirmation screen appears.
100-0001 100-0001
Monochrome Monochrome
Parameter Adj. Parameter Adj.
INFO
Stop Stop
MENU MENU
100-0001 100-0001
Red Red
Cancel Cancel
MENU
OK OK
OK
OK OK
OK