Table of Contents
Advertisement
Error Messages
This image is protected
Not enough battery power
remaining to activate Pixel
Mapping
Not enough battery power
remaining to clean sensor
Not enough battery power
remaining to update the
firmware
Unable to update firmware.
There is a problem with the
firmware update file
Image folder cannot be
created
Unable to store image
Settings not stored
The operation could not be
completed correctly
No more images can be
selected
Image not found
No image can be processed
Description
You are trying to delete an image that is
protected. Remove the protection from the
image. (p.229)
Appears during Pixel Mapping if the battery level
is insufficient. Install a fully charged battery or
use the optional AC adapter kit.
Appears during sensor cleaning if the battery
level is insufficient. Install a fully charged battery
or use the optional AC adapter kit.
Appears when trying to update the firmware if the
battery level is insufficient. Install a fully charged
battery or use the optional AC adapter kit.
Unable to update the firmware. The update file is
damaged. Try downloading the update file again.
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.228)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings could not be saved because
the SD Memory Card is full. Delete unwanted
images and perform the DPOF setting again.
(p.193)
The camera was unable to measure the manual
white balance (p.152) or use HDR Capture
(p.156). Try the operation again.
You cannot select more than the maximum
number of images for Select & Delete (p.193),
Index (p.203), and Eye-Fi Image Transfer
(p.237).
There are no images that can be transferred in
the selected folder. (p.237)
There are no images that can be processed
using the Digital Filter (p.198) or RAW
Development (p.205) function.
283
10
Advertisement
Table of Contents
