Using An Eye-Fi Card - Pentax Silkypix K-500 Operating Manual

236

Using an Eye-Fi Card

You can transfer images to your computer via wireless LAN by using
an SD Memory Card with a built-in wireless LAN (Eye-Fi card).
• Be sure to set up a wireless LAN access point on a computer in advance
for the Eye-Fi card connection. It cannot be set up on the camera.
• Images are not transferred in the following cases:
• when an image has already been transferred
• when the size of a movie is 2 GB or more
• when an Eye-Fi card is write protected
• when a wireless LAN access point cannot be found
• when the battery level is low (battery level is F (red))
• For RAW images and movie files, the success of transfer depends
on the specifications and settings of the Eye-Fi card in use.
1
Select [Eye-Fi] in the [R Set-up 2] menu, and press
the four-way controller (5).
The [Eye-Fi] screen appears.
2
Use the four-way controller (23) to select [Eye-Fi
Communication], and press the four-way controller (5).
7
3
Use the four-way controller (23)
to select the action, and press
the 4 button.
AUTO
SELECT
OFF
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears
again.
Images that have not been transferred will be transferred
automatically. Images will also be transferred when images
are taken, new images are saved, or images are overwritten.
Transfers the unsent images on the card that are selected
in playback mode (p.237).
Turns off the wireless LAN function.
Eye-Fi Eye-Fi
Eye-Fi Communication Eye-Fi Communication
Communication Info Communication Info
Automatically transfers Automatically transfers
unsent images from memory card unsent images from memory card
Cancel Cancel
MENU MENU
OK OK
OK