Selecting The Focusing Point (Af Point) - Pentax Silkypix K-500 Operating Manual

108

Selecting the Focusing Point (AF Point)

Sets the focusing point when shooting with the viewfinder.
Auto (5 AF
b
Points)
Auto (11 AF
c
Points)
S Select
O spot
4
1
Press the M button in standby mode.
The control panel appears.
2
Use the four-way controller (2345) to select [AF Active
Area], and press the 4 button.
The [AF Active Area] screen appears.
3
Use the four-way controller (45) to
select a focus point selection mode,
and press the 4 button.
The camera returns to the control panel.
• You can also change the setting from [AF Active Area] in [AF Settings]
of the [A Rec. Mode 2] menu.
• The focus point selection mode is fixed to O regardless of this setting
when using lenses other than DA, DA L, D FA, FA J, FA or F lenses.
Out of the 5 AF points, the camera selects the optimum AF
point even if the subject is not centered. (default setting)
Out of the 11 AF points, the camera selects the optimum AF
point even if the subject is not centered.
Sets the focusing point to the user selected point from eleven
points in the AF frame.
Sets the focusing point to the center of the viewfinder.
AF Active Area AF Active Area
Auto (5 AF Points) Auto (5 AF Points)
AUTO
Cancel Cancel
MENU
OK OK
OK