Using The Built-In Flash - Pentax Silkypix K-500 Operating Manual

Using the Built-in Flash

1
Press the E button.
The built-in flash pops up and begins
charging. While the flash is charging, E
blinks in the viewfinder or Live View
screen.
When the flash is fully charged, E stops
blinking and stays lit continuously.
When you do not want the flash to
discharge, keep the built-in flash retracted.
2
Take a picture.
The flash discharges.
When the flash mode is set to C or i, the flash is not discharged if the
lighting conditions do not require flash for correction even when the flash
is popped up.
3
Push down on the top of the flash
to retract the built-in flash.
By default, you cannot take pictures while the built-in flash is being charged.
If you want to take pictures while charging the built-in flash, set [15. Release
While Charging] to [On] in the [A Custom Setting 3] menu.
73
3