Table of Contents
Advertisement
286
Problem
Autofocus does
not work
The AE Lock
function does
not operate
The built-in
flash does not
discharge
10
The power
zoom system
does not work
The USB
connection with
a computer
does not work
properly
Cause
The subject is
difficult to focus on
The subject is not
in the AF area
The subject is too
close
The focus mode
is set to \
p mode is set
When the flash
mode is set to C
or C , the flash will
not discharge if the
subject is bright
K, d, A, Z,
y, U, n, or E of
H mode is set
The camera does
not have a power
zoom function
The USB
connection mode
is set to [PTP]
Remedy
Autofocus cannot work well for subjects
that have low contrast (sky, white walls,
etc.), dark colors, intricate designs,
rapidly-moving objects or scenery shot
through a window or a net-like pattern.
Lock focus on another object located at
the same distance as your subject, then
aim at the target and press the shutter
release button fully. Alternatively, use
manual focus. (p.114)
Position the subject in the AF area. If the
subject is outside the AF area, aim the
camera at the subject and lock the focus,
then compose a picture and press the
shutter release button fully.
Move away from the subject and take
a picture.
Set the focus mode switch to l or A.
(p.105)
AE Lock is not available in p mode.
Set the flash mode to E (Flash On) or F
(Flash On+Red-eye Reduction). (p.70)
Select a capture mode other than those
shown to the left. (p.86)
Use manual zoom.
Set [USB Connection] to [MSC] in
[Interface Options] of the [R Set-up 2]
menu. (p.243)
Advertisement
Table of Contents
