Table of Contents
Advertisement
Setting the File Name
You can change the file names of images.
The default naming conventions are as follows depending on the [Color
Space] (p.148) setting in [Image Capture Settings] of the [A Rec. Mode 1]
menu.
"xxxx" indicates the file number, and is displayed as a four-digit sequential
number.
Color Space
sRGB
AdobeRGB
For sRGB, you can change [IMGP] (4 characters) to the desired characters.
For AdobeRGB, of the 4 characters you selected, the first 3 are assigned
in place of [IMG].
Example: When set to [ABCDxxxx.JPG], files are named
[_ABCxxxx.JPG] for AdobeRGB.
1
Select [File Name] in the [R Set-up 2] menu and press
the four-way controller (5).
The [File Name] screen appears.
2
Press the four-way controller (5).
The text-entry screen appears.
3
Change the text.
Enter the text in the same way as [Folder Name]. Refer to Steps 4
to 6 on p.230.
Selecting the File Number Setting
You can select a method for assigning the file number of an image
when saved to a new folder. Set in [File No.] of [Memory] (p.224) in
the [A Rec. Mode 4] menu.
The file number of the last image saved to the previous folder is saved
and subsequent images are assigned sequential file numbers even
O
if a new folder is created.
The file number of the first image saved to a folder returns to 0001 each
P
time a new folder is created for saving images.
File Name
IMGPxxxx.JPG
_IMGxxxx.JPG
233
7
Advertisement
Table of Contents
