Adjusting The White Balance With Color Temperature - Pentax Silkypix K-500 Operating Manual

154
Adjusting the White Balance with Color
Temperature
Use to set the color temperature value.
1
Select K in Step 2 on p.150, and press the M button.
2
Adjust the color temperature
with the front or rear e-dial.
You can set the color temperature value
within the range from 2500K to 10000K.
5
Color temperature steps vary depending on the e-dial.
*1 The default setting for Color Temperature step units is [Kelvin]. You can change the
step units to [Mired] in [11. Color Temperature Steps] of the [A Custom Setting 2]
menu. However, figures are converted to and displayed in Kelvin.
3
Press the 4 button.
The White Balance setting screen reappears.
4
Press the 4 button.
The camera is ready to take a picture.
E-dial
Front (R)
Rear (S)
Kelvin
1 Step (100K)
10 Steps (1,000K)
10000K 10000K
G3 G3 A2 A2
Check Check
Cancel Cancel
MENU ±0 ±0
*1
Mired
1 Step (20M)
5 Steps (100M)
OK OK
OK