Pentax Silkypix K-500 Operating Manual page 222

220
Setting the Display for Instant Review
You can set the operation and display settings during Instant Review
(p.68).
1
Select [Instant Review] in the [A Rec. Mode 4] menu,
and press the four-way controller (5).
The [Instant Review] screen appears.
2
Press the four-way controller (5),
use the four-way controller (23)
to select a display time, and press
the 4 button.
3
Use the four-way controller (23) to select [Enlarge Instant
Review], [Save RAW Data], [Histogram Display] or
[Bright/Dark Area], and use the four-way controller (45)
7
to select O or P.
Enlarge Instant
Review
Save RAW Data
Histogram Display
Bright/Dark Area
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears
again.
You can magnify the image on the monitor with
the rear e-dial (S). (p.186)
Sets whether to save the RAW image by pressing the
m button when the file format of the last captured
image is JPEG and its RAW data still remains in the
buffer memory. (p.74)
Shows the brightness distribution of an image. (p.34)
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.35)
Instant Review Instant Review
Display Time Display Time
Enlarge Instant Review Enlarge Instant Review
Save RAW Data Save RAW Data
Histogram Display Histogram Display
Bright/Dark Area Bright/Dark Area
Cancel Cancel
MENU MENU
1sec. 1sec.
3sec. 3sec.
5sec. 5sec.
Off Off
OK OK
OK