Accessing The Ip Camera Using Internet Explorer; Accessing The Web Interface - Beward N13103 Installation & User Manual

Wi-fi, megapixel cmos sensor, 16 channel surveillance software included, built-in multi-zone motion and audio detection

Table of Contents

This will open the camera in Internet Explorer where you can configure the camera and

view the images.

5.3.4. Accessing the IP Camera Using Internet Explorer

To access this camera through Internet Explorer, launch this browser and enter the

following in the address field: http://<IP>:<port>/, where <IP> is the IP address of the camera,

<port> is the port number that is used for HTTP connection to the camera (Pic. 5.23).

IMPORTANT!

The default IP address of the BEWARD N13103 is 192.168.0.99.

NOTE:

You do not need to enter a port number if you are connecting through the default HTTP port 80.

After you accessed the camera using any of the ways described in

5.3.4, Internet Explorer will be launched and an authorization window will appear.

NOTE:

The web interface requires Internet Explorer 8.0 or later to run and display correctly.

Enter the camera's user name and password, then click [OK] (Pic. 5.24).

N13103 Installation User Manual

Chapter 5. Setting Up the Wired Connection for Windows 7

Pic. 5.23

paragraphs 5.3.2 –

Table of Contents