Table of Contents
Advertisement
If your wireless network is not found or temporary unavailable, you must enter the value for
the [ESSID] manually. To do so, check the [Manual setting] box.
If you select a wireless network, the [ESSID], [Authentication], [Encryption], [Key
length] fields will be filled automatically. When setting manually, you need to know the values for
the following parameters: [Authentication], [Encryption], [Key length], [Passphrase] that are
used in the wireless network. If you enter incorrect values, the connection will be impossible.
After you selected your wireless network and if the selected network is password-protected,
you must enter a password to connect to it. Enter the password in the [Passphrase] field and re-
type it in the [Re-type] field (Pic. 6.16).
IMPORTANT!
Use caution when entering the data required for connection to a wireless network. If you enter incorrect
data, the camera cannot establish the connection.
N13103 Installation User Manual
Chapter 6. Establishing and Configuring the Wi-Fi Connection
Pic. 6.15
50
Advertisement
Table of Contents
