Table of Contents
Advertisement
These methods are equivalent. Once WPS is enabled, it will stay active within a certain
period of time. You must complete the rest of the steps within this period (about 2 minutes).
Step 2: click the [Refresh] button at SETTING – Network – WPS and wait until the camera
detects your wireless network (Pic. 6.3).
Step 3: select your wireless network. For the provided example, the network's name is
BEWARD (Pic. 6.3).
Step 4: click the [Start] button. After that, you will see the connection progress window
(Pic. 6.4).
Step 5: wait for about 2 minutes until the setup process is complete.
Once the Step 1 is complete, the connection progress window will appear (Pic. 6.4). While
this window is open, the connection is established between your router and your camera. If the
connection is established successfully, you will see the following text: Connecting to
AP(BEWARD)...success! (Pic. 6.5). The name of the router your camera is connected to is shown
in the brackets. For the provided example, the router's name is BEWARD.
N13103 Installation User Manual
Chapter 6. Establishing and Configuring the Wi-Fi Connection
Pic. 6.4
41
Advertisement
Table of Contents
