Table of Contents
Advertisement
Once authorization is successful, you should get the camera images via your browser. The
settings bar is on the left side, the camera images are on the right side.
Go to SETTING – Network – WPS (Pic. 6.2).
By default, this option is disabled. To enable WPS, set it to [On] and click [OK] for the
changes to take effect. At the end of this procedure, the device search box will appear (Pic. 6.3).
This box displays WPS-enabled networks.
IMPORTANT!
WPS-enabled networks will be displayed in the box only if WPS is enabled on your router and is active.
Commonly you have 2 minutes to press the WPS button on the wireless clients. For detailed information
on WPS, please refer to your router's manual.
N13103 Installation User Manual
Chapter 6. Establishing and Configuring the Wi-Fi Connection
Pic. 6.1
Pic. 6.2
39
Advertisement
Table of Contents
