Beward N13103 Installation & User Manual page 41

The [Configure via] item is located below the search box. It offers two methods for setting
up a wireless connection:
 [PBC]: to set up a secure wireless connection, press the WPS button on both devices.
After that, wait until the settings are transmitted between your camera and your router.
Commonly it takes about 2 minutes to transmit and apply the network settings.
 [PIN]: to set up a secure wireless connection, enter your camera's security PIN in the
corresponding field of your router's WPS setup page. Once the PIN is entered, the
network settings will be transmitted only to the camera that generated the PIN. The PIN
is displayed next to the [PIN] option. To create a new PIN, click the [Generate new PIN]
button (Pic. 6.3).
NOTE:
The power LED is red when the camera is searching for a network and setting up the connection.
IMPORTANT!
Detailed information on how to enter a PIN into a particular model of a router is not provided in this
manual. Check your router's instructions for details. You can find the instructions at your router
manufacturer's website or they may be included with your router.
If you selected the [PBC] method, follow the steps below to set up the network connection:
Step 1: enable WPS on your router. To do so, you can use either of the following methods:
 Press the WPS button on your router.
 Click the button on your router's web interface.
N13103 Installation User Manual
Chapter 6. Establishing and Configuring the Wi-Fi Connection
Pic. 6.3
40