Specifications; Electrical; Ambient; Plumbing - Follett Symphony Plus 25 series Operation And Service Manual

Specifications

Electrical

§ Models with RIDE ice machines (25CR425A/W, 50CR425A/W, 25HR425A/W, 50HR425A/W). Ice machine
and dispenser require their own separate, dedicated circuit.
Basic electrical: 115 V/60 Hz/1 phase
§ Freestanding models (25FB425A/W, 50FB425A/W) require a dedicated circuit.
Basic electrical: 115 V/60 Hz/1 phase
§ Dispensers and RIDE ice machines are supplied with 7-foot power cord with NEMA 5-15 hospital-grade plug.
Connect to a dedicated 15A dedicated circuit.
Note: It is preferred that circuit be protected by a GFCI.
All field wiring must be installed in accordance with NEC and local electrical codes. Field wiring diagram is
intended only to aid electrician or technician in understanding how equipment works.
Model
25FB425A/W, 50FB425A/W
25CR425A/W, 50CR425A/W
25HR425A/W, 50 HR425A/W

Ambient

Air temp
Water temp
Water pressure

Plumbing

Dispenser drain
Ice machine drain
Dispenser water inlet
RIDE IM water inlet
Cond. inlet – w/c only
Cond. drain – w/c only
Note: Water shut-off recommended within 10 ft. (3 m) of dispenser. Drain to be hard-piped and insulated.
Maintain at least 1/4" per foot (20 mm per 1 m) run of slope.
4
Ice machine
11.0A
Total system
11.0A
CAUTION!
Electrical connection
cord & plug provided
cord & plug provided
100 F/38 C Max. 50 F/10 C Min. (Best performance below 80 F/27 C)
90 F/32 C Max. 45 F/7.2 C Min. (Best performance below 70 F/21 C)
70 P.S.I./5Bar Max. 10 P.S.I./0.7 Bar Min.
25/50 CR with RIDE
ice machine
3/4" MPT
3/4" MPT
3/8" FPT
3/8" FPT
3/8" FPT
3/8" FPT
Max. fuse Dispenser
15A 4.0A
Max. fuse
15A
115/60/1, 20A max. fuse size
115/60/1
Dispenser: 20A max. fuse size,
Ice machine: 20A max. fuse size
25/50 HR with RIDE
ice machine
3/4" barbed fitting 3/4" MPT
3/4 MPT 3/4" MPT
3/8" FPT 3/8" FPT
3/8" FPT –
3/8" FPT 3/8" FPT
3/8" FPT 3/8" FPT
25CR/HR/FB and 50CR/HR/FB
Max. fuse
15A
Circuits required
25/50 FB with ice
machine in base