Table of Contents
Advertisement
Minimum_Object: the minimum detect area. When the objects are smaller
than the minimum detect area, the system will disregard. Use mouse to click
and drag the frame on the screen.
7.
Enable Mask
Mark an area on the screen to disregards the motion in the marked area and
to only monitor outside the marked area. Mark the Enable Mask check box,
click and drag the mask frame on the screen.
8.
To reset all object frames, click Clean . To clean an object frame, click right
button of mouse and drag the object frame that user want to clean
4.10 User Setting
Only administrator can access User Setting. In the User Setting dialog box, click Add
to insert a new user, Delete to remove the selected user, Edit to modify the user
control right, OK to exit and accept the setting, and Cancel to exit without saving the
setting.
After clicking Add or Edit , you may customize the user control setting. OK to exit and
accept the setting, and Cancel to exit without saving the setting
42
Advertisement
Table of Contents
