Network Setting - Avermedia SA6000 User Manual

4.4 Network Setting

In the Network Setting dialog box, click OK to accept the new settings, click Cancel to
exit without saving, and click Default to revert back to original factory setting.
(1) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want
to make it accessible via internet using WebCam, Remote Console, PDA Viewer and
Hand Viewer (still image). To select all the cameras, enable the ALL check box.
(2) Main Configuration
Set the Server IP and Remote Console Port number. The system will automatically
detect your Server IP address. You need this when accessing SA DVR server from the
remote location via internet.
(3) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http://ddns.avers.
com.tw and register.(also see
number, product name, password, and user information. Use this service if the IP
address changes each time when you connect to internet.
(4) Webcam Port
Activate Enable Anonymous Login to remotely access the SA DVR server without
the need of password and Talk to Web-Client to use the 2-Way Talk feature that
allows the client and server to talk via internet using microphone. Make sure both
microphone and speakers work before using this feature.
If the Talk to Web-Client is disabled, the person in the SA DVR server side can only
hear the voice from the client side that is when the WebCam 2-Way Talk button is
activated. (see also
Make sure that your Webcam Digital Signature is updated yearly; else you won't
i
be able to access the SA DVR server from the SA DVR WebCam. To
update/download your Webcam Digital Signature, click Update Webcam
Digital Signature . Make sure your PC is connected to internet.
(5) Other Configuration
UPnP
-
Enable UPnP function to automatically configure the port setting on the local
network. This function is available when there is UPNP device in the same
network. It will write the DVR port information into the router or other network
device.
Enable remote users to use a PDA or a mobile phone to access SA DVR server
-
(See also Chapter 7.5 and
(1)
(2)
(3)
Appendix
Chapter 8.1 #6).
7.6) and set the Network bandwidth consumption limit.
A) You will be prompted to enter CD key
29
(4)
(5)