Table of Contents
Advertisement
7.3.1 To Setup Remote Console Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record
one hour data, the system automatically replaces the oldest data. In case you have more
than one storage path, the system automatically saves the data to the next storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click Add . To
remove the selected path, click Delete .
If you want the system to automatically erase the data after a certain days, enable the
Delete recorded data after check box and enter the numbers of days in Days text box.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language.
By default the language is in English.
(3) Remote Server
Enter the SA DVR Server IP and Port number.
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section,
enable the camera number to receive the camera signal from the server. In Visible
Channels section, enable the camera number to view the camera signal on Remote
Console screen. To select all the cameras, enable the ALL check box.
7.4 Using the Remote Playback
To use this feature, first you need to select the source of the file. In the Select Playback
Mode dialog box, choose Local Playback to open the file that is recorded in the Remote
Console, and Remote Playback to open the file that is recorded in the SA DVR server.
When you choose Remote Playback, select RealTime Playback if your internet bandwidth
is fast and big enough, otherwise choose Download and Playback .
Click OK to proceed and Cancel to void this operation.
(1)
(2)
(3)
(4)
54
Advertisement
Table of Contents
