Camera Setting - Avermedia SA6000 User Manual

(6) Map to Channel: Select to which camera number to display the transaction
(7) Text Filter

4.2 Camera Setting

In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to
exit without saving, and click Default1/ Default2 to revert back to original factory
setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the
cameras, enable the ALL check box. To select more than one camera, Right click on
the camera icon. To select one camera only, Left click on the camera icon. The
camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the
camera, we suggest disabling it so that the system won't detect it as video loss error.
(3) Camera
Display
-
Enable/disable to show the video. Even if the video of the selected camera is
hidden you can still record the video and preview it in playback mode
Name
-
Change the camera name
Description
-
Add a short comment
(4) Video Adjustment
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
Noise Reduction uses lots of CPU resource. Please use this feature only if it
i
is really necessary.
broadcast to Internet. Enter the IP address of the remote station.
text
: Enter the word you want to be removed
24
(8)
(9)