To Setup Ftp Setting; To Setup Alarm Recording Setting; To Setup Sms/Mms Setting - Avermedia SA6000 User Manual

(4) Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the
modem name. You may also set the time to disconnect automatically, just enable the
Auto Disconnect after check box and set time.

4.9.5 To Setup FTP Setting:

1. Beside the File Transmission via FTP check
box, click Detail .
2. In the FTP Setting dialog box, enter the FTP
IP, port, user ID and password.
3. In Number of Pic text box, enter the number
of sequence images that want to send when
file is transmitting.
4. In Upload image when sensor is triggered ,
select the camera that the images will be
capture and send when the sensor is
triggered.
5. Click OK to exit and save the setting and Cancel to exit without saving the
setting.

4.9.6 To Setup Alarm Recording Setting:

1. Beside the Start Recording check box,
click Detail .
2. In the Alarm Recording Setting dialog
box, select
enable/disable video recording. Enable
All to select all cameras.
3. In the Frame Rate selection, select As
Setting to record the number of frames
based on the Recording Setting or Max
to record the maximum of frames based
on the available speed.
4. In the Stop Recording after text box, set the number in second for the program to
continue recording after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.

4.9.7 To Setup SMS/MMS Setting:

To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem
to the serial COMM port of PC. Beside the SMS/MMS check box, click Detail .
Select the port number in Com Port drop down list from where the GSM/GPRS
modem is connected.
1. Click Modem Setup button to automatically detect the Modem Baud Rate.
2. In Local Phone Number text box, enter the GSM SIM card phone number.
3. In Phone Num text box, enter the contact number.
4. You may now set to send thru SMS &/or MMS. If you enable SMS setting, just
enter the message in the text box. If you enable MMS, enter the APN name, WAP
IP, MMS address and the message. If you are not sure, please contact your
mobile service provider.
the camera to
38