Engine Identification - Raymarine a Series Installation And Operation Instructions Manual

6.15 Engine identification

Engine data can be displayed on your MFD using the Data
application, which provides some preset Engine pages for
displaying some of the most common types of engine data.
Important: Before you can display Engine data on your MFD,
you must:
• Ensure that your MFD is running LightHouse software
version 8 or later.
• Refer to the important "Engine instancing" and "Engine
identification wizard" information.
• Make the data connections, according to the instructions
provided in the 87202 ECI Installation instructions.
• Ensure all data buses are powered up (including engine
data CAN buses, gateways, and also the SeaTalk
• Start the engine. Ensure that you follow any applicable
sequencing rules, as specified in the "Engine instancing"
information.
• Run the Engine identification wizard to complete any
"instancing" required and ensure that your engines are
displayed in the correct order in the Data application.
84
ng bus).
a Series / c Series / e Series