Raymarine a Series Installation And Operation Instructions Manual page 49

• Any 600 watt sonar-compatible transducer, via optional
E66066 adaptor cable.
Sonar transducer connection — Sonar variant multifunction
displays
1
1. Rear connector panel of multifunction display (Sonar
variant).
2. Sonar transducer cable.
3. Sonar transducer.
600 watt sonar-compatible sonar transducer connection via
optional adaptor — Sonar variant multifunction displays
1
2
1. Rear connector panel of multifunction display (Sonar
variant).
2. E66066 adaptor cable.
3. Sonar transducer.
Transducer adaptor cable
Cable Part number
0.5 m (1.64 ft) transducer E66066
adaptor cable
Sonar transducer connection — Non-Sonar variant
multifunction displays
hs
SeaT alk /
RayNet
SeaT alk
3
1. Rear connector panel of multifunction display (Non-sonar
variant).
2. Raymarine network switch (only required if connecting more
than one device using SeaTalk
3. RayNet cable.
4. Raymarine sonar module.
5. Sonar transducer cable.
6. Sonar transducer.
Cables and connections
3
3
1
4
2
hs
/ RayNet
hs / RayNet).
Minn Kota sonar transducer connection via optional adaptor
cable (Sonar variant multifunction displays only)
1
1. Rear connector panel of multifunction display (Sonar
variant).
D12256-1
2. Minn Kota transducer adaptor cable.
3. Minn Kota transducer cable.
4. Minn Kota transducer.
Sonar variant multifunction displays
The table below details which multifunction display variants
feature a built-in sonar module and can be connected directly to
compatible sonar transducers.
Non-sonar variants
a65
a65 Wi-Fi
a75
a75 Wi-Fi
D12257-1
e7
c95
c125
e95
e125
e165
Minn Kota transducer adaptor cable
Connects a Minn Kota sonar transducer to a compatible
Raymarine multifunction display.
Cable
1 m (3.28 ft) Minn Kota transducer
adaptor cable
Thermal camera connection
You can connect a thermal camera to your New c Series or New
e Series multifunction displays.
Note: New a Series does not support thermal cameras.
The camera is usually connected via a Raymarine network
switch. If you want to use the optional Joystick Control Unit
(JCU) with the camera this must also be connected to the
5
network switch. A composite video connection is required
between the camera and the multifunction display.
T200 Series thermal camera connection
6
1
D12258-1
1. T200 Series fixed mount thermal camera.
2. Multifunction display.
2 3
Sonar variants DownVision variants
a67 a68
a67 Wi-Fi a68 Wi-Fi
a77 a78
a77 Wi-Fi a78 Wi-Fi
e7D
c97
c127
e97
e127
Part number
A62363
4
4
D12259-1
5
D12839-1
47