Community Layer - Raymarine a Series Installation And Operation Instructions Manual

By default the Chart grid is switched off.
Switching the chart grid on and off
The Chart grid can be switched on and off by following the steps
below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Chart Grid: so that On is selected to turn the grid
on, or
4. Select Chart Grid: so that Off is selected to turn the grid off.
2D shading
If supported by your cartography type, you can switch shading of
land and sea contours on and off.
1
2
1. 2D shading On.
2. 2D shading Off
By default 2D shading is switched on.
Switching 2D shading on and off
2D shading can be switched on and off by following the steps
below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select 2D Shading: so that On is selected to turn the
shading on, or
4. Select 2D Shading: so that Off is selected to turn the
shading off.
172

Community layer

If supported by your cartography type, you can display User
Generated Content (UGC) on the Chart application.
1
2
1. Community feature On.
2. Community feature Off.
To check if your Navionics cartography supports community edits
downloads please refer the Navionics website: for information
and instructions on downloading the updates to your chart card.
Switching the community edits on and off
If supported by your cartography type, the User Generated
Content (UGC) overlay can be switched on and off by following
the steps below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Community Edits: so that On is selected to display
UGC, or
4. Select Community Edits: so that Off is selected to turn off
UGC.
Chart text
If supported by your cartography type, chart text such as place
names and caution text etc. can be switched on and off.
1
D13002-1
2
1. Chart text On.
2. Chart text Off.
The default setting for Chart text is On.
Switching chart text on and off
The Chart text can be switched on and off by following the steps
below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Chart Text: so that On is selected to turn chart text
on, or
4. Select Chart Text: so that Off is selected to turn chart text off.
D13008-1
D13006-1
a Series / c Series / e Series