Pilot Bar - Raymarine a Series Installation And Operation Instructions Manual

1. Select any of the following options from the Chart context
menu:
• Goto Waypoint
• Goto Cursor
• Follow Route
• Follow from Here
• Follow Route in Reverse
The pilot control dialog is displayed.
2. Select Yes (Track).
Manually displaying the pilot control dialog
box
You can also open the Pilot Control dialog at any time from the
homescreen or chart application.
1. From the homescreen:
i. Select Set-up.
ii. Select Pilot Controls.
2. From the chart application:
i. Select Menu.
ii. Select Navigate.
iii. Select Pilots Controls.
110

10.2 Pilot Bar

The Pilot Bar provides autopilot status information. For
touchscreen displays you can disengage the autopilot using
the Pilot Bar.
Pilot Bar — Track mode
Pilot Bar — Auto mode
The Pilot Bar is displayed when autopilot control is enabled, the
Pilot Bar is switched on and the autopilot is engaged.
When the autopilot is disengaged the Pilot Bar is hidden.
On a system containing multiple displays the Pilot Bar can be
disabled or enabled on each display.
Enabling the Pilot Bar
When connected to a SeaTalk or SeaTalk
Pilot Bar can be enabled by following the steps below.
From the Homescreen, with autopilots controls enabled:
1. Select Customize.
2. Select Display Preferences.
3. Select Pilot Control Bar so that Shown is highlighted.
Selecting Pilot Control Bar will switch the Pilot Bar between
Shown and Hidden.
4. Engage the autopilot.
The Pilot Bar is now displayed at the bottom of the screen in all
applications whilst the autopilot is engaged.
Note: When connected to an Evolution autopilot the Pilot Bar
is enabled from the Pilot Set-up page.
ng SPX autopilot the
a Series / c Series / e Series