Raymarine a Series Installation And Operation Instructions Manual page 76

• Radar scanner.
• AIS receiver / transceiver.
• Sonar module.
• GPS receiver.
• Autopilot.
Autopilot status symbols
The autopilot status is indicated in the databar.
Symbol Description
Autopilot is in Standby mode.
Autopilot is in Track mode.
Autopilot is in Auto mode.
No autopilot detected.
Autopilot alarm active.
Dodge mode is active.
Fish mode is active.
Autopilot calibration.
Power steering active.
Wind Vane mode is active.
Radar scanner status symbols
The radar scanner power mode status is indicated in the databar.
Radar
power
Symbol mode
Transmit
(TX)
Standby
(STBY)
74
Description
Rotating icon, signifying that the scanner
is on and transmitting. When SCANNER
is set to ON, select this mode to activate
the scanner. This is the usual mode of
operation.
Static icon, indicating that the scanner is
on but not transmitting, and the antenna is
not rotating. The scanner does not transmit
and the radar data is removed from the
screen. This is a power-save mode used
when the radar is not needed for short
time periods. When you return to transmit
mode, the magnetron does not need to
warm up again. This is the default mode.
Radar
power
Symbol mode
Off
Timed
Transmit
AIS status symbols
AIS status is indicated by a symbol in the databar.
Symbol Description
AIS unit is switched on and operating.
AIS currently unavailable.
AIS unit is switched off, or not connected.
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active alarms.
AIS unit is connected and switched on, but
has active alarms.
AIS unit is connected and switched on, but
the dangerous and lost alarm is disabled.
Sonar status symbols
The sonar status is indicated in the databar.
Symbol
Description
Scanner powered off when radar not
required, but display is in use for other
applications, such as the chart. When
selected, the system counts down. During
this time you cannot re-power the scanner.
Scanner switches between on/transmitting,
and standby mode. Scanner goes into
power save mode when constant use of
radar is not required.
Description
Symbol animated: the sonar module
is connected and transmitting.
Symbol static: the sonar module is
connected but not transmitting.
Symbol greyed-out: the sonar
module is not connected, or is not
detected.
a Series / c Series / e Series