Appendix E Switch Panel Application - Raymarine a Series Installation And Operation Instructions Manual

PIN
13
14
15
374
Signal
VIDEO IN2 RTN
RED RTN
RED

Appendix E Switch panel application

Vessel control and monitoring systems
When integrated with a vessel control and monitoring system
your multifunction display can provide monitoring and controls
for your power circuits, breakers, switches and equipment.
The Switch Panel application can be used to:
• Show the status of power circuits, breakers, switches and
other equipment.
• Apply power to each circuit individually.
• Reset tripped breakers.
• Control power to individual equipment.
• Alert users to a tripped circuit.
Vessel control and monitoring system connection
The multifunction display can connect to and control an
EmpirBus NXT vessel control and monitoring system.
1
2
4
5
1
2
3
4
5
Note: Ensure your vessel control and monitoring system has
been installed in accordance with the instructions provided
with the system.
Switch panel configuration
The switch panel application must be configured.
A Configuration file can be obtained from the system supplier.
Loading a configuration file
The switch panel application will only be available when a valid
configuration file has been loaded.
1. Obtain the configuration file from the system supplier.
2. Save the configuration file to the root directory of your
memory card.
3
12 V dc
D12738-1
Raymarine multifunction display.
EmpirBus NXT DCM (dc module).
SeaTalk ng to DeviceNet adaptor
cable.
EmpirBus NXT MCU (Master control
unit).
12 V dc supply into backbone.
a Series / c Series / e Series