System Set-Up Menus - Raymarine a Series Installation And Operation Instructions Manual

27.8 System set-up menus

The system set-up menus enable you to configure your display and connected external devices.
The following menus are available:
Menu item
Touch-Lock
Alarms
Fuel Manager
Pilot Controls
Pilot Response
Audio Controls
Ground Trip Resets
System Settings
Maintenance
320
Description
Enables you to lock the touchscreen of a touch only
display when the display is paired with a remote keypad.
Note: This option is not available on touch-only
displays which do not have a remote keypad
connected.
Note: This option is not available on displays which
have physical buttons.
Enables you to configure all the different types of alarms
produced by the display and connected equipment.
Displays the Fuel manager page
Displays the Pilot Control dialog.
Enables selection of the pilot response level when
connected to an Evolution autopilot.
Note: Pilot Response is not available on SPX and
SeaTalk autopilots.
Displays the audio controls pop-up.
Note: Not available on non-touch displays.
Resets the chosen ground trip distance counter to zero.
Enables you to configure the settings for external
devices connected to the display.
Provides diagnostic information. Also enables you to
designate the data master and reset the display to
factory settings.
Notes
• ON
• OFF (default)
Only available when a Raymarine autopilot is detected
on the system and Autopilot Control is set to On.
• Leisure
• Cruise
• Performance
Only available when connected to an audio device via
bluetooth.
a Series / c Series / e Series