Navigation Options - Raymarine a Series Installation And Operation Instructions Manual

1 Navionics servers
2
Download Navionics Freshest Data to mobile device (internet
connection required)
3 Mobile device running Navionics mobile app
4 Download Navionics Freshest Data to MFD (Wi-Fi connection
to MFD required)
5 MFD
6 * Upload Sonar Logs and Community edits to mobile device
(Wi-Fi connection to MFD required)
7
** Upload Sonar Logs and Community edits anonymously to
Navionics servers (internet connection required)
Note:
* To participate in Navionics Sonar Charts, Sonar logging
must be enabled on your MFD. Sonar Logs can be enabled
from the Chart application menu: Menu > Depth & Contour >
Sonar Logs.
** The Sonar logs shall be uploaded to Navionics servers
anonymously.
To use this feature you must first:
1. Download and install the Navionics Mobile Marine app,
available from the relevant app store.
2. Subscribe to Navionics Freshest Data.
3. Download Freshest data to your mobile device.
4. Enable Wi-Fi in the System Settings on the MFD.
5. Enable Wi-Fi on your mobile device.
6. Select the MFD Wi-Fi connection from the list of available
Wi-Fi networks on your mobile device.
Navionics Freshest Data
Navionics offer a 12 month subscriptions to their Freshest Data
service, which includes updates to nautical charts, sonar charts
and community edits layer.
Nautical charts — Navionics 2D charts.
Sonar Charts — High definition bathymetry chart layer created
by combining multiple data sources including Sonar Logs
provided by Navionics community users.
Community Edits — Edits made by Navionics users.
To obtain Freshest Data insert your Navionics chart card into
your PC, visit the Navionics website
Click Downloads & Updates.
162
www.navionics.com and

16.3 Navigation options

The chart application provides features to help navigate to a
chosen location.
The navigation options are found in the Navigate menu: Menu >
Navigate
• Pilot Controls — Accesses the Pilot Control Dialog, when
Autopilot Control is enabled.
• Goto Cursor — Will set the cursor position as the active
destination.
• Goto Waypoint — Provides options to navigate to a waypoint
stored on the system
• Stop Goto — Stops the Goto Cursor or Goto Waypoint.
• Stop Follow — Stops following the current route.
• Restart XTE — Restarts the Cross Track Error.
• Advance Waypoint — When following a route, skips to the
next waypoint in the route.
• Follow Route — Provides options to navigate to a route
stored on the system
• Start Track / Stop Track — Will initiate a track on screen
to plot your course as you progress or stop a track that is
currently being created.
• Build Route — Provides options to build a route.
Refer to Chapter 15 Waypoints, Routes and Tracks
on creating waypoints, routes and tracks.
Navigation
Navigating to a waypoint on the screen
From the chart or radar application:
1. Select the waypoint.
The waypoint context menu is displayed.
2. Select the Goto Waypoint.
Note: With an active waypoint selected you can select Stop
Goto option from the waypoint context menu at any time to
cancel the action.
Navigating to a waypoint using the waypoints group list
From the Chart application:
1. Select WPT.
The waypoint menu is displayed.
2. Select Waypoints.
The waypoints group list is displayed.
3. Browse the group list for the relevant waypoint.
4. Select the waypoint.
The waypoint options dialog is displayed.
5. Select Goto.
Navigating to a location on the chart
From the chart application:
1. Select the required location on-screen.
The chart context menu is displayed.
2. Select Goto Cursor.
for details
D11753-2
a Series / c Series / e Series