Resetting The Sonar - Raymarine a Series Installation And Operation Instructions Manual

17.19 Resetting the sonar

The reset function restores the unit to its factory default values.
Note: Performing a factory reset will clear speed and
temperature calibration settings and the depth offset.
1. Using a compatible Raymarine multifunction display go to the
Fishfinder application page.
2. Select Menu from the side menu.
3. Select Set-up.
4. Select Sounder Set-up.
5. Select Sonar reset.
6. Select Yes to confirm.
The unit will now be reset to factory default settings.
Fishfinder application
205