Raymarine a Series Installation And Operation Instructions Manual page 102

1. Ensure you have the memory card containing the data in
one of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Erase from Card.
The file browser is opened.
5. Browse to and select the file you want to erase.
A confirmation dialog is displayed.
6. Select Yes.
Erasing waypoints, routes, and tracks from
the system
Note: The following procedure permanently erases selected
or ALL waypoints, routes, or tracks stored on the display.
BEFORE proceeding, ensure that you backup any data that
you want to keep on to a memory card.
With the Homescreen displayed:
1. Select My Data.
2. Select Import/Export.
3. Select Erase from System.
4. Select Erase Waypoints from System, Erase Routes from
System, or Erase Tracks from System, as appropriate.
5. Select the specific data items you want to erase, or select
Erase All.
A message is displayed prompting you for confirmation.
6. Select Yes to proceed with the deletion, or No to cancel the
operation.
Backing up user settings to a memory card
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart card) in one
of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Backup Settings.
If your display has more than 1 card slot then a message is
displayed prompting you to select the memory device you
want to save the settings to, if your display only has 1 card
slot then you will not be prompted.
5. Select SD1 for a memory card in the top card slot, or SD2 for
a memory card in the bottom card slot.
A confirmation dialog is displayed.
6. Select OK.
Restoring user settings from a memory card
With the Homescreen displayed:
1. Ensure you have the memory card containing the user data
in one of the card slots.
2. Select My Data.
3. Select Import/Export.
4. Select Restore Settings.
If your display has more than 1 card slot then a message is
displayed prompting you to select the memory device you
100
want to retrieve settings from, if your display only has 1 card
slot then you will not be prompted.
5. Select SD1 for a memory card in the top card slot, or SD2 for
a memory card in the bottom card slot.
A confirmation dialog is displayed.
6. Select OK.
Save and restore items
The table below details the data items and settings which will be
saved to and restored from a memory card on your multifunction
display.
Homescreen and system settings
Application Setting
Homescreen Default page configuration
System settings Position mode
Text size
Shared brightness
Brightness group
TD set-up
Simulator
Bearing mode
MOB Data type
Variation source
Manual variation
Language
Date format
Time format
Local time offset
Distance units
Distance subunits
Speed units
Depth units
Temperature units
Pressure units
Volume units
Autopilot control
System settings —
integration
DSC message
SeaTalk alarms
Bridge NMEA heading
Multiple data GPS position source
sources
Heading source
Depth source
Speed source
Wind source
Databar set-up Databar content (cell 1 to 6)
Compassbar
Status icon
GPS status GPS screen
a Series / c Series / e Series