Pan And Tilt Camera - New Camera Interface - Raymarine a Series Installation And Operation Instructions Manual

20.6 Pan and tilt camera — new camera interface
The thermal camera application menu options for a pan and tilt thermal camera with the new camera interface are shown below.
Activate Camera
Pause Image
Camera Home
Image Options
Adjust Contrast
Standby
Camera Set-up
256
Brings the thermal camera out of standby mode. (only available when camera is in standby.)
• On
• Off (default)
Select to return the camera to its home position.
Select to display the Image Options sub-menu.
• Color
– Red
– Greyscale
– Glowbow
– Rainbow
– Fusion
• Scene
– Night Running
– Night Docking
– Day Running
– Man Overboard
• Thermal / Visible
• Reverse video
• Rear View
• Surveillance
Select to display the Adjust Contrast sub-menu.
• Contrast
• Brightness
• Color
Select to place the camera in to standby mode. (only available when camera is activated.)
Select to display the Camera Set-up menu.
• Set Home Position
• Slew Settings
• Align Camera
• Elev Align:
• Surveillance Settings
• Default Color
• Icon Level
• Stabilization Mode
• Point Mode
• Ball Down Mode
• High Power Standby
• High Power Torque
• JCU Icon
• PC Icon
• Restore Factory Defaults
• Calibrate Platform
a Series / c Series / e Series