Hitachi SJ7002 Series Instruction Manual page 324

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
Trip Factor Code, HIGH order
Code Name
0 No trip
1 Over current event while at constant
speed
2 Over current event during deceleration
3 Over current event during acceleration
4 Over current event during other condi-
tions
5 Overload protection
6 Braking resistor overload
7 Over voltage protection
8 EEPROM error
9 Under-voltage error
10 CT (current transformer) error
11 CPU error
12 External trip
13 USP
14 Ground fault
15 Input over-voltage
16 Instantaneous power failure
20 Inverter thermal trip with low fan
speed
21 Inverter thermal trip
23 Gate array error
24 Phase failure detection
25 Main circuit error
30 IGBT error
35 Thermistor
36 Brake error
37 Emergency stop
38 Low-speed overload protection
43 Easy sequence error (invalid instruc-
tion)
44 Easy sequence error (invalid nesting
count)
45 Easy sequence execution error 1
50 to 59 Easy sequence user trip 0 to 9
60 to 69 Expansion card #1 error 0 to 9
70 to 79 Expansion card #2 error 0 to 9
SJ700
Trip Factor Code, LOW order (inverter status)
Code Name
0 Reset
1 Stop
2 Deceleration
3 Constant speed
4 Acceleration
5 Run Command active with 0 Hz speed
reference
6 Starting
7 DC braking
8 Overload restriction
9 SON or FOC operation in progress
B–41
Inverter
2