Basic Operation - Icom IC-­M71 Instruction Manual

D Channel name/comment programming
q Push [Y]/[Z] to select a channel to
program.
• Push and hold [DIAL] for 1 sec. to se-
lect a channel group, f necessary.
w Whle pushng and holdng [
push [DIAL].
• The 1st character of the currently pro-
grammed name or comment blnks.
e Push [Y]/[Z] to select a character.
r Push [H/L•LOCK] to move to the
rght; then push [Y]/[Z] to select a
character.
• Pushng [16•C], moves to left
t Contnue untl the desred charac-
ters have been selected, then push
[DIAL] to return to normal opera-
ton.
],
D Opening comment programming
q W h  l e p u s h  n g a n d
[SCAN•DUAL], turn power ON.
• "OC" s dsplayed and the 1st character
of the currently programmed comment
blnks.
w Push [Y]/[Z] to select a character.
• Push [SCAN•DUAL] to clears the pre-
vously programmed openng comment
(all dgts).
e Push [H/L•LOCK] to move to the
rght; then push [Y]/[Z] to select a
character.
• Pushng [16•C], moves to left
r Contnue untl the desred charac-
ters have been selected, then push
[DIAL] to return to normal opera-
ton.
The programmed openng comment s brefly dsplayed or
scrolled when the transcever s powered ON.
However, the openng comment ndcaton can be skpped
by pushng [16•C].

BASIC OPERATION

h o l d  n g
4
4
13