Dualwatch/Tri-Watch (Except Dutch Versions); DescrPt; Operat - Icom IC-­M71 Instruction Manual

6
DUALWATCH/TRI-WATCH
n Description
Dualwatch montors Channel 16 whle you are recevng
another channel; tr-watch montors Channel 16 and the call
channel whle recevng another channel.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch
• If a sgnal s receved on Channel 16, dualwatch/tr-watch paus-
es on Channel 16 untl the sgnal dsappears.
• If a sgnal s receved on the call channel durng tr-watch, tr-
watch becomes dualwatch untl the sgnal dsappears.
• To transmt on the selected channel durng dualwatch/tr-watch,
push and hold [PTT].
16
Call channel
Tri-watch
(except Dutch versions)
n Operation
q Select the desred operatng channel.
w Push [SCAN•DUAL] for 1 sec. to start dualwatch or tr-
watch
(dependng on the SET mode settng; p. 19)
• "DUAL" blnks durng dualwatch; "TRI" blnks durng tr-watch.
• A beep tone sounds when a sgnal s receved on Channel 16.
• Tr-watch becomes dualwatch when recevng a sgnal on the
call channel.
e To cancel dualwatch/tr-watch, push [SCAN•DUAL] agan.
[Example]: Operatng tr-watch on INT channel 07.
Push for 1 sec.
Tri-watch starts. Signal is received
on the call channel.
A signal receive on
Channel 16 always
takes priority.
.
Tri-watch resumes
after the signal
disappears.