Dvd Player With S Video And Audio Connectors - Sony KDS-R50XBR1 Service Manual

Connecting the TV
DVD Player with
S VIDEO and Audio
Connectors
DVD player
40
Use this hookup if:
❑
Your DVD player does not have component (YP
Disconnect all power sources before making any connections.
1
Use an A/V cable to connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2
Use an S VIDEO cable to connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
S VIDEO
S VIDEO
cable
AUDIO-R
AUDIO-L
A/V cable
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
✍
To watch the DVD, press TV/VIDEO repeatedly to select the DVD
input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player and want to set up the TV remote control to operate it, you
must program the remote control. See "Programming the Remote
Control" on page 48.
✍
To control DVD functions with the TV remote control, See
"Operating a DVD Player" on page 50.
✍
To easily identify equipment connected to the TV, see "Label Video
Inputs" on page 96.
Rear of TV
VIDEO
P ) jacks.
B R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.