Download  Print this page

Advertisement

Using i.LINK
Connecting i.LINK Devices
This TV has three S400 i.LINK terminals (one on the front panel, and two
on the back panel). You can use the following i.LINK cables with this TV:
4-pin i.LINK cable
Do not use cables other than the ones listed above.
i.LINK provides a secure digital interface to other digital home
entertainment devices, such as digital VCRs, digital camcorders, set-top
boxes, and other devices that also are equipped with i.LINK. i.LINK allows
for the secure transfer of copyright-protected digital content between these
devices and your digital television.
All products with an i.LINK connector may not communicate with each
other.
Before connecting this unit to i.LINK-compatible equipment, read
the instruction manual of the i.LINK device to be connected.
To connect a digital i.LINK device (using only a digital signal)
1
Using an i.LINK cable, connect the device's i.LINK jack to any of the
TV's i.LINK jacks.
To connect an i.LINK device that supports an EIA-775A connection
1
Using an i.LINK cable, connect the device's i.LINK jack to any of the
TV's i.LINK jacks.
2
Using an A/V cable, connect the i.LINK device's A/V output jacks to
the TV's VIDEO 3 A/V input jacks.
Only one i.LINK cable should connect the TV and any given i.LINK
device.
Sony Model Length
VMC-IL4415
1.5 meters
VMC-IL4435
3.5 meters
(Continued)
73

Advertisement

Table of Contents

   Related Manuals for Sony KDS-R50XBR1

This manual is also suitable for:

Kds-r60xbr1

Comments to this Manuals

Symbols: 0
Latest comments: