Selecting Pc Setup Options - Sony KDS-R50XBR1 Service Manual

Sxrd projection tv
Hide thumbs Also See for KDS-R50XBR1:
Table of Contents

Advertisement

Selecting PC Setup
Options
z When there is no signal
input, settings for the
PC Setup options
except Power
Management cannot be
changed.
z A warning message will
appear before switching
to the power saving
mode.
To display the PC screen:
See "Using the PC Input" on
page 60.
The PC Input Setup setting includes the following options:
Option
Description
Auto
Select to automatically adjust the display position of the picture
Adjustment
when the TV receives an input signal from the connected PC.
Note that Auto Adjustment may not work well with certain
input signals. In such cases, manually adjust the options below.
Phase
Select to adjust the phase when the screen flickers.
Pitch
Select to adjust the pitch when the picture has unwanted
vertical stripes.
Horizontal
Select to adjust the horizontal position of the picture.
Center
Allows you to move the picture left and right in the window.
Press B or b and press
Vertical Center
Select to adjust the vertical position of the picture.
Allows you to move the picture up and down in the window.
Press B or b and press
Wide Mode
Normal
Full 1
Full 2
A black frame will appear on the surrounding of
the picture.
When using SXGA signals and Wide Mode is set to
Normal, the top and bottom of the picture will be
cropped. When it is set to either Full 1 or Full 2 with
SXGA signals, the picture will appear in reduced size.
Power
On
Management
POWER/STANDBY LED will light up in red when
your TV is in the power saving mode.
Off
Reset
Select to restore the factory default settings.
Setup
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Adjust PC setup options
Resolution − − − x − − − / − − Hz
to choose a correction between +63 and -64.
to choose a correction between +63 and -64.
Select to display the picture in its original size.
Select to enlarge the picture to fill the display area,
keeping its original horizontal-to-vertical ratio.
Select to enlarge the picture to fill the display area.
Select to automatically switch to the power
saving mode when there is no signal input for
10 minutes.
Select to turn off Power Management.
Using the Settings
MENU
Exit
(Continued)
99

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Kds-r60xbr1

Table of Contents