Download  Print this page

Advertisement

Other Information
Problem
Audio noise.
Cannot gain enough volume
when using a cable box.
Sound seems weak or
insufficient.
Cannot raise the volume on
external speakers.
Channels
Problem
Cannot receive upper channels
(UHF) when using an antenna.
TV is fixed to one channel.
Cannot receive any channels
when using cable TV.
Cannot receive or select
channels.
Some digital cable channels are
not being displayed.
112
Possible Remedies
Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Please use headphones other
than cordless headphones. Also, if you use infrared communication equipment
other than infrared cordless headphones, move the infrared transceiver away from
the TV until the noise is eliminated, or move the transmitter and receiver of the
infrared communication equipment closer together.
Increase the volume of the cable box using the cable box's remote control. Then
press FUNCTION repeatedly until the TV indicator lights up and adjust the TV's
volume.
The TV's audio might be set to Auto SAP or Mono, when it might be better set to
Stereo. In the Audio setting (see page 87), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 87). Or, to use the TV remote control, set the Audio Out
option to Variable.
To turn on the TV speakers, set the Speaker option to On (see page 87).
Possible Remedies
Press ANT to select the VHF/UHF input (see page 46).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 90).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 90).
Check your Channel Fix settings (see page 90).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 90).
Press ANT to select the CABLE input (see page 46).
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV memory (see page 90).
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
The digital cable channel may be set to Hidden in the Channel setting (see page
91).

Advertisement

Table of Contents

   Related Manuals for Sony KDS-R50XBR1

This manual is also suitable for:

Kds-r60xbr1

Comments to this Manuals

Symbols: 0
Latest comments: