Using the Settings
Accessing the Channel Settings
. Press to select
To highlight an option and to change settings,
press V v B b.
to confirm the selection.
To exit the Channel settings, press
The Channel settings include the following options:
Lets you set up a list of your favorite channels. For details, see
"Using Favorite Channels" on page 58.
Useful when you
have a cable box
Video 1, 4
Digital Channels Add
Automatically sets up the channel list on the TV for all receivable
channels for the current input (VHF/UHF or CABLE). Select to start
the Auto Program.
Program favorite channels
Turns off Channel Fix.
"Fix" your TV's channel setting to one channel (2-6)
and use the cable box, VCR or satellite receiver to
change channels. Select one of these settings if you
have connected the device to the VHF/UHF jack.
"Fix" your TV's channel setting to C2–C6 (CABLE
input) and use the cable box or satellite receiver to
Use when connecting a cable box. TV output should
be connected through the cable box.
Automatically adds the channel list on the TV for all
receivable digital channels for current input. Select
to start the Add.
Auto Program may take between 20-50 minutes to
complete. A progress bar will display the
approximate progress of the Auto Program and
Digital Channels/Add sequences.
Auto Program will create a list of receivable
channels for the current input (VHF/UHF antenna
or CABLE). You will be required to run Auto
Program for each RF input to create a list of
available channels from both inputs.