Press to turn on and on/off the TV and other audio/video
equipment you have programmed into the remote control. For
details, see "Programming the Remote Control" on page 48.
Press when in a menu to reset the settings to the factory
Press to cycle through the video equipment connected to your
TV's video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3,
VIDEO 4, VIDEO 5, VIDEO 6, VIDEO 7 and VIDEO 8.
Press once to display the current time and channel label (if set)
and channel number. Press again to turn Display off. See page
102 for details on setting the time.
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
ql 0 – 9 and
Press 0 - 9 to select a channel: the channel changes after 3
seconds. Press ENTER to change channels immediately.
Press to display the Favorite Channels list. For details, see
"Using Favorite Channels" on page 58.
Press to freeze the current picture. Press again to restore the
picture. For details, see "Using the FREEZE Button" on page
Press to display the i.LINK Control Panel. For details on using
the i.LINK Control Panel, see page 76. Also available in the
Applications setting (page 101).
Press to display the Memory Stick Menu.
For details, see "Using the Memory Stick Viewer" on page 61.
Press to display the TV on-screen setting. Press again to exit
from the setting.
wg CH +/–
Press to scan through channels. To scan quickly through the
channels, press and hold down either +/– button.
Press to exit the on-screen setting or display and return to
RESET menu does not operate when in PC
menu, Advanced Video, and White Balance.
Watching the TV