Download  Print this page

Advertisement

z If 4:3 Default is set to
anything but Off, the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs), Wide Mode
is automatically
replaced with the 4:3
Default setting. To retain
the current Wide Mode
setting as channels and
inputs are changed, set
4:3 Default to Off.
Option
Description
4:3 Default
Wide Zoom
Select the default
screen mode to
use for 4:3
Normal
sources.
Full
Zoom
Off
Overscan
Normal
+1 or +2
Vertical Center
Allows you to move the position of the picture up and down in
the window. (Available only in Zoom and Wide Zoom mode.)
Press V or v and press
and –10.
Vertical Size
Allows you to adjust the vertical size of the picture. (Available
only in Zoom and Wide Zoom mode.)
Press V or v and press
and –10.
Using the Settings
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the display area.
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Select to continue using the current screen
mode setting when the channel or input is
changed.
Select to display the picture within the normal
viewing area of the screen.
Select to reduce the size of the picture to show
the overscan (i.e. the portion of the picture
outside of the normal viewing area).
to choose a correction between +10
to choose a correction between +10
89

Advertisement

Table of Contents

   Related Manuals for Sony KDS-R50XBR1

This manual is also suitable for:

Kds-r60xbr1

Comments to this Manuals

Symbols: 0
Latest comments: