Dvd Player With S Video And Audio Connectors - Sony KDS-70Q006 Service Manual

DVD Player with
S VIDEO and Audio
Connectors
DVD player
Use this hookup if:
❑
Your DVD player does not have component (Y, P
Disconnect all power sources before making any connections.
1
Using an audio cable, connect the DVD player's AUDIO OUT jacks to
the SXRD projection TV's AUDIO IN jacks.
2
Using a S VIDEO cable, connect the DVD player's S VIDEO jack to
the SXRD projection TV's S VIDEO jack.
Rear of SXRD projection TV
S VIDEO
S VIDEO
cable
AUDIO-R
AUDIO-L
A/V cable
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
✍
To watch the DVD player, press TV/VIDEO repeatedly to select the
DVD input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player, and want to set up the TV remote control to operate the DVD
player you must program the remote control. See "Programming the
Remote Control" on page 64.
✍
To control DVD functions with the TV remote control, see "Operating
a DVD Player" on page 67.
✍
To label video inputs to easily identify equipment connected to the
TV, see the instructions for setting up Video Labels on page 123.
Setting Up the SXRD Projection TV
, P ) jacks.
B R
Cables are often
VIDEO
color-coded to connectors.
Connect red to red,
white to white, etc.
49