Dvd Player With S Video And Audio Connectors - Sony GRAND WEGA 2-059-370-14(2) Operating Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
DVD player
Use this hookup if:
❑
Your DVD player does not have component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Using an audio cable, connect the DVD player's AUDIO OUT jacks to
the LCD projection TV's AUDIO IN jacks.
2
Using a S VIDEO cable, connect the DVD player's S VIDEO jack to the
LCD projection TV's S VIDEO jack.
Rear of LCD projection TV
S VIDEO
S VIDEO
cable
AUDIO-R
AUDIO-L
Audio cable (not supplied)
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
✍
To watch the DVD player, press TV/VIDEO repeatedly to select the
DVD input (VIDEO 1 in the illustration). If you have a non-Sony DVD
player, and want to set up the TV remote control to operate the DVD
player you must program the remote control. See "Programming the
Remote Control" on page 62.
✍
To control DVD functions with the TV remote control, see "Operating
a DVD Player or DVD Changer" on page 65.
✍
Label video inputs to easily identify equipment connected to the TV.
See the instructions for setting up Video Labels on page 113.
Setting Up the LCD Projection TV
VIDEO IN
1 3 4
S VIDEO
VIDEO
L (MONO)
AUDIO
R
VIDEO
(red)
(yellow)
(white)
VHF/UHF CABLE
7
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
47