Introducing the TV
3 CableCARD slot
4 VIDEO 8 (PC) IN
(VIDEO 6 IN and
VIDEO 7 IN)
6 S VIDEO
Connects to your cable signal. This CABLE input jack, in conjunction with the VHF/UHF
input jack, lets you set up your TV to switch between scrambled channels (coming through
a cable box) and unscrambled cable channels. For details, see page 25.
Connects to your VHF/UHF antenna or cable box output jack.
CableCARD provides cable subscribers with access to secure, digitally encrypted cable
channels — without the need for a set-top box — that will enable you to receive not only
standard definition but also high definition television. For details, see page 32.
Connect to the video output connector and audio output jack on your personal computer.
For details, see page 41.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video component,
such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-
definition video, plus two-channel digital audio. You can also connect a DVI-equipped
device to your TV by using an HDMI-to-DVI cable.
Connects to the S VIDEO OUT jack of your VCR, camcorder, or other S VIDEO-
equipped video component. Provides better picture quality than the VHF/UHF jacks or the
VIDEO IN jack.
Connects to the audio and video OUT jacks on your VCR or other video component. A
third video input (VIDEO 2) is located on the front panel of the TV.