Dvd Player With S Video And Audio Connectors - Sony Grand WEGA KDF-E60A20 Operating Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Use this hookup if:
❑
Your DVD player does not have component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Use an audio cable to connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2
Use a S VIDEO cable to connect the DVD player's S VIDEO jack to the
TV's S VIDEO jack.
DVD player
Audio cable (not supplied)
✍
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
✍
To watch a DVD, press TV/VIDEO repeatedly to select the DVD input
(VIDEO 1 in the illustration). If you have a non-Sony DVD player, and
want to set up the TV remote control to operate the DVD player you
must program the remote control. See "Programming the Remote
Control" on page 44.
✍
To control DVD functions with the TV remote control, see "Operating
a DVD Player or DVD Changer" on page 46.
✍
Label Video Inputs to easily identify equipment connected to the TV.
See the instructions for setting up Video Labels on page 70.
Rear of TV
S VIDEO
S VIDEO
S VIDEO
cable
VIDEO
L (MONO)
AUDIO
R
AUDIO-R
(red)
AUDIO-L
(white)
Connecting the TV
VIDEO IN
1 3
VIDEO
(yellow)
37