Download  Print this page

Using The I.link Control Panel - Sony KDS-R50XBR1 Service Manual

Sxrd projection tv.
Hide thumbs

Advertisement

Using i.LINK

Using the i.LINK Control Panel

The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
76
After you select an i.LINK device using the Device List, the TV displays the
i.LINK Control Panel, which allows you to use the TV's remote to control
the selected i.LINK device.
1
If the i.LINK Control Panel is not already displayed, press
remote control.
If i.LINK is pressed while the TV is displaying an analog or digital
channel (not the i.LINK device), then the Device List will appear.
Select the desired device from the list and press
Control Panel.
2
Press V v B b on the remote control to navigate through the options
available in the i.LINK Control Panel.
3
Press
to select a desired option.
4
Press
to exit the Control Panel and view the i.LINK device in full-
EXIT
screen.
To exit i.LINK mode, select DTV from the Device List or press
CH +/–.
i.LINK
Back to Device List
Control Panel
52.3
The i.LINK Control Panel displays the signal from the TV to the left on
screen (if available), and the signal from the currently selected device to the
right on screen.
Power
Setup
Swap Audio
Exit i.LINK
Full Screen
Status: Playing.
on the
i.LINK
to display the
VICTOR HM-DH35000
00:00:31

Advertisement

Table of Contents

   Related Manuals for Sony KDS-R50XBR1

This manual is also suitable for:

Kds-r60xbr1

Comments to this Manuals

Symbols: 0
Latest comments: