Tv Controls And Connectors; Front Panel - Sony KDS-R50XBR1 Service Manual

Introducing the TV

TV Controls and Connectors

Front Panel

Item Description
1 POWER/
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see "Contacting Sony" on page 2). When the red LED
STANDBY LED
blinks only three times, the lamp door of the lamp unit or the lamp itself is not securely attached
(see page 106). The red indicator is on when i.LINK STANDBY is on or when your TV is in the PC
power saving mode.
2 TIMER LED When lit, indicates one of the timers is set. When it is set, this LED will remain lit even if the TV is
turned off. For details, see page 101.
3 LAMP LED Lights up in red when the lamp for the light source has burned out. For details, see "Replacing the
Lamp" on page 104.
4 (IR) Infrared Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Receiver
5 POWER Press to turn on and off the TV.
6 Speaker
Outputs audio signal.
7 CHANNEL +/– Press to scan through channels. To scan quickly through channels, press and hold either
– or +.
8 VOLUME +/– Press to adjust the volume.
9
Press to confirm the selection or setting.
Press repeatedly to cycle through the video equipment connected to the TV's video inputs.
TV/VIDEO
q; MENU
Press to display the TV on-screen setting and activate the
again to exit the TV on-screen setting and activate the TV/VIDEO, VOLUME +/– and
CHANNEL +/– buttons.
16
POWER/STANDBY
TIMER
1 2
✍
The CHANNEL + button has a tactile dot. Use the tactile dot as a reference
when operating the TV.
POWER/STANDBY
POWER
STD/DUO LAMP TIMER
POWER
LAMP
4
3 5
6
CHANNEL
3
7
#
VOLUME
3
8
#
TV/VIDEO
9
MENU
0
B b v V
, , , , and buttons. Press