Table of Contents
Advertisement
3.6
Footrest Gemini 2 (Seat width 40)
L
WARNING:
Risk of injury – Check that the footrest is securely locked in
place before use.
L
WARNING:
Risk of injury – Check the screw connections are secured before
using the footrest.
L
WARNING:
Risk of injury, stability – Check the position of the adjustment knobs
every time to prevent that they would be in a position that would endanger the
user.
L
WARNING:
Risk of injury, stability – Never stand on the footplate with your full
body weight.
L
CAUTION:
Risk of clamping – Keep objects and people away from the footrest
swing range.
3.6.1 Positions of the footplate
By default the footplate is in a horizontal position.
With the emphasis on transport and rehabilitation and getting out of the Gemini 2, the
footplate must be turned into the direction of the undercarriage of the footrest.
The footplate has been equipped with plastic foot supports to prevent uncontrollable sliding
of the feet. As additional security, foot belts (B19) have been implemented.
3.6.2 Adjusting the length of the footrest
The angle of the foot supports can be
adjusted in 4 different positions (steps: 8,5°)
1. Loosen the wing nuts .
2. Turn the foot supports in the desired
position.
3. Retighten the wing nuts .
4. Check the foot supports are firmly
fixated.
The design of Gemini 2 40 provides a
gradual change in the length of the footrest.
The footrest of the Gemini 2 40 can be
changed in 2 different lengths (steps 35 mm:
outer tube) and 4 different lengths (steps of
25 mm: inner tube).
Adjustments are made as follows:
1. Loosen the screws on both sides.
2. Move the footplate up- or downwards
until the desired length.
3. Retighten the two screws again.
4. Check the footplate is firmly fixated.
Page 11
Gemini 2
2014-03
Advertisement
Table of Contents
