Table of Contents
Advertisement
2.3
Mounting or removing the rear wheels
L
CAUTION:
Risk of injury – Check that the rear wheels are correct mounted before
using the Gemini 2.
2.4
Folding / Unfolding the frame
L
CAUTION:
Risk of clamping – Keep fingers, buckles away from the folding
mechanism.
To fold the frame:
1. Pull parts Ⓐ on both sides upwards until it comes loose from tube Ⓑ.
2. Push the pushbar Ⓒ to the front, to fold the frame.
3. Turn the frame so the front and rear wheels and tube Ⓓ rest on the ground.
4. Now the frame can be completely folded.
5. Turn the pushbar downwards with the buttons Ⓔ.
To unfold the frame:
1. Grasp the pushbar Ⓒ and move these upwards to unfold the frame.
2. Turn the frame so the front and rear wheels can rest on the ground.
3. Move the pushbar backwards to unfold the frame completely.
4. Check that the parts Ⓐ clicks over the tube Ⓑ and the frame is firmly secured.
5. Turn the pushbar with the buttons Ⓔ in the desired position.
The fast and safe removal of the wheels is very
convenient for transport in smaller cars.
By usage of the special axle, a fast removal is possible.
Use your thumb to press the silver U clamp on the
wheels to the inside. After that, the wheel can be
removed, by pulling the wheel softly out the frame.
For mounting the wheels again, the same procedure
needs to be followed. Push the silver U clamp and
slide the wheel in the lower frame to lock into position.
Improper assembly or use of tyres other than ours
voids any warranty claim.
Page 1
Gemini 2
2014-03
Advertisement
Table of Contents
